• Image 1
$119.95
Model #: 980-821
Quantity:

Product Description

Kensight® Adjustable Front and Rear Sight Set for the Compact Large Frame Glock®, .350" Tall Front (980-821)

 

We all know the factory Glock® sights leave more to be desired. In addition, the factory fixed sight dovetail, placed at the very rear of the slide, is small, shallow and not generally seen as ideal for an adjustable sight.  Kensight has designed sight set to fit the LARGE FRAME Glock pistols, Kensight Item# 860-817.  This fully adjustable rear utilizes the factory dovetail without having to modify the slide.  It is precise and practical, well-built and able to withstand a lifetime of use.  Because it is a fairly tall sight that sits completely on top of the side, a front sight with a minimum height of .315” is necessary. This is why Kensight had beveled the rear blade to prevent snagging and to protect the shooters hands.  This sight is fully adjustable for windage and elevation.  With positive clicks, a simple turn of the screw will let you dial it in to shoot at any reasonable distance. Not only is the sight highly effective and easy to use, it looks good too!  Knowledgeable shooters will note that our rear sight blade does not extend past the rear of the slide like many other adjustables that can extend 1/4" past the slide, putting your hands and clothes at risk.

This sight set’s front, Kensight item# 870-931, is fully serrated, .100” wide and .350” tall.  This sight was designed for use with a suppressor but is also to be used when shooting longer distances or when a higher sight is just necessary. This .350" front can be used on sub compacts, full size and long slide Glock pistols when shooting longer distances. Please keep in mind that it MAY be too tall for holsters that don’t have a front sight rib or recess extending the length of the holster’s pocket.  Very simple to install, it is held in with a screw that is provided with this set.  No sight or slide modification is necessary.

Pistol Compatibility, Front and Rear Sight:Full Size, Long Side, Small Frame, Range Gun.  Best when using lighter loads and a suppressor.

  • 10mm: G20, G29, G40
  • .45: G21, G30, G36, G41
  • .45 G.A.P: G37, G38, G39

*Please see Kensight Item#

960-821: for the full size, large frame for height for carry guns with heavier loads

970-821: for range guns with lighter loads

Technical Information 

  • Material: 4140 Chrome Moly Steel 
  • Finish: Black Oxide 
  • Rear Sight Blade Type: Fully Serrated, Beveled,
  • Rear Notch Width: .118” wide x .100” deep
  • Front Sight Blade Height: .350”
  • Front Sight Blade Size: .100"
  • Sight Dovetail: Factory Glock Rear Dovetail  
  • Dovetail Dimensions: .260” wide x .078” deep x 65°

 Similar Sights

  • 960-821: Kensight® Adjustable, Carry Glock®, Front and Rear Sight Set for the Large Frame, Includes a .315" Tall Front (960-821)
  • 970-821: Kensight® Adjustable, Range Glock® Front and Rear Sight Set for the Large Frame, Includes a .330" Tall Front (970-821)
  • 980-817: Kensight® Adjustable, Suppressor Height Glock®, Front and Rear Sight Set for the Small Frame, Includes a .350” Tall Front (980-817)

 

 

Shadow Image

Warranty Information

Limited Lifetime Warranty

We stand behind our products. All Kensight Sights are covered by a limited lifetime warranty. We guarantee our products against defects in material and construction. This limited lifetime warranty does not extend to normal signs of wear. It does not cover breakage, damage or rust due to misuse, improper maintenance, accidents, loss or theft. The warranty does not extend to damages cause by unauthorized repairs.

Any product we determine to be defective will be repaired or replaced solely at our discretion. To receive warranty repair or replacement, the owner must send the product to be evaluated by KFS Industries Warranty Services located at our Atlanta, Georgia headquarters. In addition to the provisions of this warranty, the owner may also have other rights that can vary by state. No other warranties are implied or expressed other than what is specifically stated here.

Warranty Service

All products returned to KFS Industries for a warranty claim must have prior approval of a KFS Customer Service employee in the form of a Return Material Authorization Number (RMA). The RMA must be displayed on the exterior of the return carton. Merchandise returned without an RMA will be refused. The RMA number assigned will expire 30 days from date of issue. To obtain an RMA, please call the KFS Atlanta, Georgia headquarters at (404) 691-7611.

After you obtain your RMA, Please send your product to:

KFS Industries Inc.
875 Wharton Dr SW
Atlanta, GA 30336
 

You must pay the shipping and insurance costs to return your product to KFS Industries Inc., and we will pay the shipping charges to return the product to your US address only. All International shipping will be the responsibility of the consumer.

Upon receipt of a returned product, we will verify warranty coverage. If the product is not covered by warranty, KFS Industries Inc. will send you an estimate of the cost to repair your product prior to performing any services not covered. Trijicon installs all the tritium vials on the Kensights. All tritium warranty issues must be sent to Trijicon directly.

Shadow Image

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Shadow Image