• Image 1

Product Description

KENSIGHT® Dovetail Front Sight, 0.077" Tritium Insert w/ "PRO-GLO" ORANGE Outline, Contoured Profile

Kensight® is proud to offer the new “PRO-GLO” style Front Night Sight. These highly visible fronts incorporates a self-illuminating AmeriGlo® Green Tritium Dot nestled within a bright orange fiber-optic style outline that glows brightly in low and well-lit conditions to help draw the shooter's eye to the front post much faster than a black serrated, fiber optic or standard night sight. This is done with optimal color contrast between the front in orange and rear in white or black target. In order to ensure the strength and integrity of our sights, Kensight Wire-EDM machines them from 4140 Chrome Moly Steel. 

This Front Night Sight comes equipped with a 0.118" wide blade and a contoured base that keeps the round-top slide and the sight's dovetail uniform, resulting in a clean looking installation that requires little (if any) filing to accomplish. All the sights listed here, except for the 880748 are compatible with Novak type front sight dovetail cuts (0.330" x 65 Degree x 0.075") as typically found on both customized and factory 1911 pistols.


  • 0.160" tall blade, #880-716: Commonly used with the Kensight® FIXED DFS/Novak®, Kimber® and “SLAM” sights. 0.160” tall fronts come in these fixed sight sets. Most GI fixed rear sights require a .140” tall front.
  • 0.180” tall blade, #880-718: Commonly used with the Kensight® FIXED DFS/Novak®, Kimber® and “SLAM” FIXED on compacts and sub-compact 1911’s with
  • 0.200" tall blade, #880-720: Commonly used with the Kensight® FULLY ADJUSTABLE BoMar®, Rollo™, LPA® and Kimber® and ELEVATION ONLY DAS “NOVAK” sights.0.200” tall fronts come in these sight sets.
  • 0.230", tall blade, #880-723: Commonly used with the Kensight® FULLY ADJUSTABLE NOVAK® STYLE (DAS™) sights. 0.230” tall fronts come in sight sets 960-636/970-636 and 960-638/970-638.
  • 0.250” tall blade, #880-725: Commonly used with various adjustable rear sights. Taller than most front sights, the 0.250” is used when the rear sight has been adjusted all the way down but the bullet is still hitting high. This height does not come standard in any set.
  • 0.180” tall .350” WIDE DOVETAIL, #880-748: Used on Springfield (EMP’s and some Range Officers), some model Colts and Dan Wesson’s that were made prior to January 2015 (the first two digits in the serial number are the year of manufacture). PLEASE MEASURE YOUR FRONT DOVETAIL BEFORE ORDERING. This front does not come standard in any set.

Please Note: Other heights and dovetail styles can be purchased in quantities of 10 or more sights only and will take 3-4 weeks to produce.


  • Material: 4140 Chrome Moly Steel
  • Blade Type: Smooth Green Tritium Dot (0.076" Dia)
  • Outline Style/Color: “PRO-GLO” Orange
  • Blade Width: 0.118"
  • Sight Base: Contoured
  • Sight Dovetail: Novak Type
  • Dovetail Dimensions: 0.330" (Width) x 65° (Angle) x 0.075" (Depth) and 0.350" (Width) x 65° (Angle) x 0.075" (Depth)



Front Sight Height Guide

Shadow Image

Warranty Information

Limited Lifetime Warranty

We stand behind our products. All Kensight Sights are covered by a limited lifetime warranty. We guarantee our products against defects in material and construction. This limited lifetime warranty does not extend to normal signs of wear. It does not cover breakage, damage or rust due to misuse, improper maintenance, accidents, loss or theft. The warranty does not extend to damages cause by unauthorized repairs.

Any product we determine to be defective will be repaired or replaced solely at our discretion. To receive warranty repair or replacement, the owner must send the product to be evaluated by KFS Industries Warranty Services located at our Atlanta, Georgia headquarters. In addition to the provisions of this warranty, the owner may also have other rights that can vary by state. No other warranties are implied or expressed other than what is specifically stated here.

Warranty Service

All products returned to KFS Industries for a warranty claim must have prior approval of a KFS Customer Service employee in the form of a Return Material Authorization Number (RMA). The RMA must be displayed on the exterior of the return carton. Merchandise returned without an RMA will be refused. The RMA number assigned will expire 30 days from date of issue. To obtain an RMA, please call the KFS Atlanta, Georgia headquarters at (404) 691-7611.

After you obtain your RMA, Please send your product to:

KFS Industries Inc.
875 Wharton Dr SW
Atlanta, GA 30336

You must pay the shipping and insurance costs to return your product to KFS Industries Inc., and we will pay the shipping charges to return the product to your US address only. All International shipping will be the responsibility of the consumer.

Upon receipt of a returned product, we will verify warranty coverage. If the product is not covered by warranty, KFS Industries Inc. will send you an estimate of the cost to repair your product prior to performing any services not covered. Trijicon installs all the tritium vials on the Kensights. All tritium warranty issues must be sent to Trijicon directly.

Shadow Image

Product Reviews

Write Review

  1. Follow Web Site Procedure it will fit perfectly

    Posted by Albert on 6th May 2020

    I have a DW Vigil 9mm that was shooting about 8" high at 25 yards I wanted to hit steel at 100 yards so replaced the sight after reading the Ken sight fitment information and measured correctly it came in perfect dead on at 25 yards after doing the math. The sight was about .008" wider than the dovetail so a small amount of polishing still made a snug fit with a sight tool correct installation. Please read the directions first and follow the Ken Sight Information and in less than 15 minutes you will have a new perfect sight for what you want.

  2. Great sights!

    Posted by Leslie on 1st Jan 2019

    These sights provide a great picture. They are a quality product. Delivery was timely. Could not be happier. Thank you.

Shadow Image